CSU Maritime Academy 2015/16-2016/17 Catalog [ARCHIVED CATALOG]
Undergraduate Course Descriptions
|
|
Definitions
A prerequisite is an academic requirement that must be completed prior to enrolling in a course.
A co-requisite is an academic requirement that must be taken concurrently with a course.
♦ Denotes a course that fulfills STCW (Standards of Training, Certification, and Watchkeeping for Seafarers) requirements. US Coast Guard license program students must achieve a grade of C- or higher in order to pass an STCW course.
(CSL) Denotes that these courses have a community service component, which may be in addition to regular class hours or part of the course itself, as indicated.
Academic Department/School Designations
| ATH |
Athletics |
| CC |
Culture & Communication |
| ET |
Engineering Technology |
| XL |
Extended Learning |
| LIB |
Library |
| MT |
Marine Transportation |
| MPM |
Maritime Policy and Management |
| ME |
Mechanical Engineering |
| NS |
Naval Science |
| SM |
Sciences & Mathematics |
The academic department designation with the course description determines the department that hosts the course.
All courses are graded using the A–F system unless otherwise specified.
Course Numbering System
0 – 99: remedial courses (not applicable to degree)
100 – 299: .lower division
300 – 499: upper division
Electives
Scheduled general electives can be found in the searchable online class schedule. In the Class Search criteria, enter “ELEC” under Course Attribute to search for all electives. Additionally, use Course Attribute value for individual electives. These electives are also identified according to their designation within the five areas of the CSU General Education requirements.
|
| |
Law |
| |
-
LAW 300 - International Law
Class Hours: 3, Units: 3
Prerequisite(s): None
International Law is presented in a maritime context. Topics addressed include the sources of international maritime law; the state-centric system; treaties; legal aspects of land, air, and water territories; law of the sea; piracy and maritime terrorism; ISPS Code; international jurisdiction over persons and vessels; international arbitration and courts; the law of war; and the law of war at sea. Practical, useful, contemporary knowledge is provided as well as an appreciation and discussion of the esoteric nature of international maritime law. Readings will involve case studies while lectures will offer substantive international law as it shapes the maritime world. Historic as well as current issues will be discussed employing balanced perspective and dialogue.
MPM
|
| |
-
LAW 315 - Admiralty Law
Class Hours: 2, Units: 2
Prerequisite(s): Junior Class Standing or Documented Maritime Experience
Focuses upon the legal principles applicable to maritime commerce upon the seas and navigable water: traditionally called admiralty law. Coverage includes development of general maritime law and American admiralty law, indicia of jurisdiction, scope of the maritime jurisdiction, substantive maritime law, maritime liens, towage, salvage, maritime torts, collision law, worker’s compensation claims, wrongful death, limitation of liability, and jurisdiction and procedure in maritime claims.
MPM
|
| |
-
LAW 385 - Study Abroad Elective
MPM
|
| |
-
LAW 390 - Independent Study
MPM
|
| |
-
LAW 395 - Special Topics
MPM
|
Leadership |
| |
-
LDR 185 - Study Abroad Elective
MPM
|
| |
-
LDR 195 - Special Topics
MPM
|
| |
-
LDR 210 - Foundations of Leadership
Class Hours: 3 Units: 3
Prerequisite(s): None
This course is designed to assist students with developing the skills needed to be successful for a lifetime of engaged, responsible leadership. The course examines leadership in the context of a changing and culturally diverse workplace; students will gain an understanding of leadership and how this concept has developed over time. Various leadership models, from around the world and from different historical epochs, will be studied and analyzed. Additionally, students reflect on the meaning of ethics and decision-making in the contemporary world. Emphasis will be placed on interpersonal skills, team building, communication, personal development, and leadership. Students will develop personal attributes and social skills and be provided with opportunities to apply their knowledge. This course will serve as a beginning point for an examination of issues and concepts involved in the study of leadership and begin the process of preparing students for a lifetime of engaged, responsible leadership.
MPM
|
| |
-
LDR 385 - Study Abroad Elective
MPM
|
| |
-
LDR 390 - Independent Study
MPM
|
| |
-
LDR 395 - Special Topics
MPM
|
Library |
| |
-
LIB 100 - Information Fluency in the Digital World
Class Hours: 2, Units: 2
Prerequisite(s): None
This class will provide students with an introduction to research, information management and computing technology skills that are fundamental for success in the college environment and beyond. Students will explore the research process, develop efficient search methodologies in an online environment, and learn to critically evaluate resources. Simultaneously, students will be given an orientation to the use of Microsoft Office programs, with special attention paid to information management, critical-thinking and problem-solving.
LIB
|
| |
-
LIB 185 - Study Abroad Elective
LIB
|
| |
-
LIB 195 - Special Topics
LIB
|
| |
-
LIB 385 - Study Abroad Elective
LIB
|
| |
-
LIB 390 - Independent Study
LIB
|
| |
-
LIB 395 - Special Topics
LIB
|
Management |
| |
-
MGT 105 - Management and Organizational Behavior
Class Hours: 3, Units: 3
Prerequisite(s): None
This course explores important transitions and trends in the environment of contemporary global business processes and activities. Its main focus is the human resources channel of the supply chain, including the primary functions of recruiting, training, and work force maintenance. Within this primary focus, control mechanisms (such as protection of the confidentiality of employee records), labor relations, leadership, organizing, and planning are addressed. Case examples in the maritime and logistics industry will frequently be referenced to enhance course objectives.
MPM
|
| |
-
MGT 185 - Study Abroad Elective
MPM
|
| |
-
MGT 195 - Special Topics
MPM
|
| |
-
MGT 205 - Organizational Behavior and Labor Relations
Class Hours: 3, Units: 3
Prerequisite(s): None
Presents the student with a comprehensive overview of the theory and practice of planning and managing human capital in business organizations. The student acquires knowledge and understanding of human resource management, unionism, multiculturalism, diversity, and the integration of business and government in organizing, planning, and controlling human resources.
MPM
|
| |
-
MGT 300 - Advanced Management Techniques
Class Hours: 3, Units: 3
Prerequisite(s): None
Gives the student a basic understanding of quantitative methods and their application to business decisionmaking. The course includes statistics, probability, mathematics of finance, and inventory control. Use of computers for decision-making in management is also included. (For MT Only)
MPM
|
| |
-
MGT 305 - Information Systems Management
Class Hours: 3, Units: 3
Prerequisite(s): COM 100 or Equivalent Course
A comprehensive study of the use of computers for management decision-making. An examination of traditional information systems and system development techniques focusing on the end user’s perspective. The course uses applications software to develop knowledge of the computer environment. Students use databases to analyze information about the business environment from such sources as the Internet, the financial databases, and other library and college databases.
MPM
|
| |
-
MGT 310 - Port and Terminal Management and Operations
Class Hours: 3, Units: 3
Prerequisite(s): ECO 100 , MGT 100 or MGT 105 or NAU 108
This course provides an overview of modern port and terminal operations, including logistics processes such as on-dock rail, strategic and tactical planning, harbor drayage, terminal gate protocols, equipment and cargo management, and integration of marine port and terminal operations with other modes of transportation. The student will gain an introduction to several different types of marine terminals, including containerized liner facilities, dry bulk, and liquid bulk facilities, ro-ro terminals, and others. The class presentation will be rooted in a brief historical review of developments in maritime industry and policy.
MPM
|
| |
-
MGT 315 - Internship
Units: 2-3
Prerequisite(s): Junior Class Standing, with the permission of Department Chair; MGT 100 or MGT 105
Students may apply to complete an industry internship. Each assignment depends on each student’s specialty or special area of interest. The activities may include, but are not limited to, vessel and stevedoring companies, shipyards, government agencies, ship brokerage/ chartering firms, port authorities, insurance firms, or truck, rail, pipeline, or air carriers. Upon completion of the assignment, each student must submit a written report on the experiences and training received. Management issues are the focal points of the assignment and paper. The internship is only offered during the summer break for a minimum of two weeks.
MPM
|
| |
-
MGT 325 - Principles of Purchasing
Class Hours: 3, Units: 3
Prerequisite(s): MGT 340
Supply and purchasing in modern business, and its role in global supply chain management and strategy. Students analyze and critique complex international cases based on real problems and real enterprises, learn what supply and suppliers can do to enhance revenue as well as reduce cost, and study the total supply management process in the context of organizational goals and supply chain management. Topics include a discussion of statistical process review, product and service supplier selection, outsourcing, ISO 9000, contracts, negotiations, cultural and ethical issues in supply management, and security, environmental, and product safety issues.
MPM
|
| |
-
MGT 335 - Advanced Information Systems
Class Hours: 3, Units: 3
Prerequisite(s): MGT 305
An introduction to the concepts and principles of information systems in the context of modern organizations. The practical learning will concern database management: how to provide timely, accurate and relevant information to users in the organization; and how to use linear programming to quantify, format and solve business problems.
MPM
|
| |
-
MGT 340 - Global Logistics
Class Hours: 3, Units: 3
Prerequisite(s): MTH 100
Logistics is the science of movement of materials from raw material to the customer, a critical factor in today’s global business environment. The maritime profession is a crucial part. Enterprises of all kinds find logistics to be a key difference for their customers, and an important way to get competitive advantage. Many recent business successes rely on visions involving logistics, and exploit the latest technologies. Students learn current ideas and technologies in the field from transportation, warehousing, inventory, product design, packaging, security, and reverse logistics, and look at global and management issues as well. Case analysis makes students devise answers and look at alternatives closely, so they can find their own answers later in their career.
MPM
|
| |
-
MGT 385 - Study Abroad Elective
MPM
|
| |
-
MGT 390 - Independent Study
MPM
|
| |
-
MGT 395 - Special Topics
MPM
|
| |
-
MGT 400 - Strategic Management
Class Hours: 3, Units: 3
Prerequisite(s): Senior Class Standing
A capstone course that requires computer modeling and the use of most of the courses in the business curriculum to solve problems in business management. Because the course is an integrative case study course, students must use knowledge acquired in management, finance, accounting, and statistical analysis.
MPM
|
| |
-
MGT 410 - Quantitative Managerial Methods
Class Hours: 3, Units: 3
Prerequisite(s): MTH 107
Practical applications of mathematical models for managerial decision-making. Topics include basis for optimization of decisions; linear and integer programming; transportation problems, queuing theory and simulation. Use of MS Excel as a tool for conducting optimization studies. Students use case analysis to learn how to develop and assess validity of models.
MPM
|
| |
-
MGT 415 - Operations Management
Class Hours: 3, Units: 3
Prerequisite(s): MTH 107
Focuses on the concepts of production management. Topics include a discussion of manufacturing and service processes and strategies, production capacity analysis, quality management and other concepts.
MPM
|
| |
-
MGT 420 - Supply Chain Management
Class Hours: 3, Units: 3
Prerequisite(s): MTH 107
Students focus on understanding basic techniques and strategic issues of global supply chain management, including the impact of culture, strategic planning, organization, and management control, which add value during the successful movement of products from their origins as raw materials to their final destinations as finished products. Specific topics may include customer service, e-commerce, facilities location, routing and pricing, storage, transportation, emerging technologies, and re-engineering the supply chain. Examples will be drawn from supply chains including a maritime link.
MPM
|
| |
-
MGT 440 - Logistics Case Analysis
Class Hours: 3, Units: 3
Prerequisite(s): MGT 340 , MGT 420
This is a capstone course in logistics management requiring students to utilize and integrate their knowledge acquired in courses taken previously which deal with supply chains, transportation, and logistics. Several modes of learning advance students’ ability to analyze complex logistics and supply chain scenarios and make decisions. Student teams compete in a logistics operations simulation with the goal of maximizing logistics contribution through their decision making. Case studies with both written reports and presentations teach students to apply modern principles and practices to achieve competitive advantage. Short critical reviews of current journal articles show how modern techniques are applied. A logistics consulting project with an outside client allows students to see and deal with real situations and practitioners. Quantitative and qualitative modeling techniques will be employed and Microsoft Excel, as well as other computer software, will be utilized.
MPM
|
Marine Science |
| |
-
MSC 100 - Introduction to Geological and Chemical Oceanography
Class Hours: 3, Units: 3
Prerequisite(s): None
The history of oceanography, seafloor features, global plate tectonics, marine sediments, the chemistry of seawater, dissolved gases in seawater, and ocean resources are covered. The course meets a natural science elective requirement.
SM
|
| |
-
MSC 105 - Introduction to Biological and Physical Oceanography
Class Hours: 3, Units: 3
Prerequisite(s): None
Introduction to atmosphere-earth-ocean interactions, global climate processes, ocean circulation, waves, tidal processes, plankton, nekton, and benthic organisms. The course meets a natural science or life science elective requirement.
SM
|
| |
-
MSC 185 - Study Abroad Elective
SM
|
| |
-
MSC 195 - Special Topics
SM
|
| |
-
MSC 200 - Oceanographic Instruments and Analysis
Class Hours: 2, Units: 3
Co-requisite(s): MSC 200L
The course provides students “hands-on” experience with oceanographic sampling and analysis. Students learn techniques for measuring temperature, salinity, dissolved oxygen, phosphate, chlorophyll, pH and carbon dioxide, and submarine light levels. Two field trips are planned for the course.
SM
|
| |
-
MSC 200L - Oceanographic Instruments and Analysis Lab
Lab Hours: 3, Units: 0
Co-requisite(s): MSC 200
SM
|
| |
-
MSC 205 - Marine Biology
Class Hours: 3, Units: 3
The topics covered in this course are marine invertebrates, marine algae, marine fishes, and marine mammals. Other topics covered are the ecology of tidepools, mudflats, sandy beaches, tropical reefs, and the deep benthos. The course meets a natural science or life science elective requirement.
SM
|
| |
-
MSC 205L - Marine Biology Laboratory
Lab Hours: 2, Units: 1
Co-requisite(s): MSC 205
As a co-requisite, Marine Biology Laboratory provides students with the opportunity to more fully explore the concepts introduced in MSC 205 . Students will be introduced to the use of stereo and compound microscopes, and use plankton nets for the collection and enumeration of phytoplankton and zooplankton. Students will perform invertebrate and vertebrate dissections, and explore unique northern California marine ecosystems such as salt marshes, estuaries, the intertidal, and marine mammal breeding grounds.
SM
|
| |
-
MSC 380 - Directed Research
Class Hours: 3, Units: 3
Prerequisite(s): Prerequisites: MSC 100 , MSC 105
A requirement for students completing the Marine Science Minor. Working with a faculty mentor, students develop and conduct a marine science research project. Students demonstrate competence in hypothesis testing, gathering and analyzing oceanographic data. The project culminates with a written or oral presentation.
SM
|
| |
-
MSC 385 - Study Abroad Elective
SM
|
| |
-
MSC 390 - Independent Study
SM
|
| |
-
MSC 395 - Special Topics
SM
|
Maritime Policy & Management |
| |
-
MPM 185 - Study Abroad Elective
MPM
|
| |
-
MPM 190 - T.S.G.B./International Experience Preparation
Class Hours: 1, Units: 1
Prerequisite(s): None
A one-unit course offered in the spring term to Business and Global Studies students prior to participation in their Training Ship GOLDEN BEAR (T.S.G.B.) cruise or any of the international experiences offered by the ABS School of Maritime Policy and Management. As part of the course, students will complete all necessary pre-trip plans, including document collection, medical information training, language primers, and associated tasks. Students plan and arrange for site visits, factory or transport enterprise visits, seminars, and other activities to be conducted while in port, and/or during voyages.
MPM
|
| |
-
MPM 195 - T.S.G.B./International Experience Special Topics
Class Hours: 3, Units: 3
Prerequisite(s): MPM 190
This course is a special topics course to be taught to Business and Global Studies students participating in their Training Ship GOLDEN BEAR (T.S.G.B.) cruise or their international experience. Topics will be related to the specific destinations, and reflect the expertise and interest of the instructor as well as the nature of the itinerary.
MPM
|
| |
-
MPM 385 - Study Abroad Elective
MPM
|
| |
-
MPM 390 - Independent Study
MPM
|
| |
-
MPM 395 - Special Topics
MPM
|
Mathematics |
| |
-
MTH 001 - Intermediate Algebra
Class Hours: 4, Units: 4
Prerequisite(s): Beginning Algebra
A thorough review of algebra at an intermediate level. The topics covered are sets and operations, equations and inequalities, polynomials, rational expressions, rational exponents, roots, radicals, quadratic equations, graphing equations, and functions.
XL | Graded: A, B, C, NC
|
| |
-
MTH 100 - College Algebra and Trigonometry
Class Hours: 4, Units: 4
Prerequisite(s): Two years of high school algebra or MTH 001 , or passing score on ELM, or otherwise exempt from remediation.
Combines the necessary elements of college algebra and trigonometry to prepare students for subsequent study of calculus, computer programming, navigation and the physical sciences. Topic coverage includes linear, quadratic and higher polynomial equations, rational logarithmic and exponential functions and equations, trigonometric functions and their inverses and equations, with graphical representation of all of the above. Other topics are generalized and periodic functional relationships, multivariable systems with matrix algebra including inversion and determinants, complex numbers, vectors and appropriate computational methods, the rapid computation of values in plane triangles and various functions using the pocket calculator.
SM
|
| |
-
MTH 105 - Finite Math
Class Hours: 3, Units: 3
Prerequisite(s): MTH 100
A foundation course on basic theories and models of mathematics and how these models can be applied to decision making in business. Topics include systems of linear equations, linear programming, the mathematics of finance, probability, and basic concepts of statistics.
SM
|
| |
-
MTH 107 - Elementary Statistics
Class Hours: 3, Units: 3
Prerequisite(s): MTH 100 or ELEC 70
This course is a study of general concepts of statistics, including sampling, probability distributions, statistical inferences, confidence intervals, hypothesis tests, and correlations. Use of technology, including graphing calculators or computers will be used extensively to describe and analyze data.
SM
|
| |
-
MTH 185 - Study Abroad Elective
SM
|
| |
-
MTH 195 - Special Topics
SM
|
| |
-
MTH 205 - Calculus for Business
Class Hours: 3, Units: 3
Prerequisite(s): MTH 100 with a C- or higher
Focuses on basics of calculus and the application of this topic to business decision-making and problem solving. Students will concentrate on formulae that will be performed on Excel later in the curriculum. The course will present math theory and math models. Exercises in critical thinking and model building will be introduced, along with the application of these two tools to the quantitative analysis of business problems.
SM
|
| |
-
MTH 210 - Calculus I
Class Hours: 4, Units: 4
Prerequisite(s): MTH 100 or equivalent with a C- or higher
Introduction of functions and limits, differentiation, applications of differentiation, integration, and applications of the definite integral.
SM
|
| |
-
MTH 211 - Calculus II
Class Hours: 4, Units: 4
Prerequisite(s): MTH 210 with a C- or higher
An introduction to additional methods of integration and improper integrals. Presented are trigonometric and hyperbolic functions and their inverses; infinite sequences and series; and a brief introduction to linear, ordinary first, and second-order differential equations.
SM
|
| |
-
MTH 212 - Calculus III
Class Hours: 4, Units: 4
Prerequisite(s): MTH 211 with a C- or higher
An introduction to the algebra and calculus of vectors. Presented are functions of several variables and partial differentiation, as well as multiple integration and vector analysis.
SM
|
| |
-
MTH 215 - Differential Equations
Class Hours: 4, Units: 4
Prerequisite(s): MTH 211 with a C- or higher
Introduces first-order differential equations and secondorder differential equations with constant coefficients. Laplace transforms, small systems of linear differential equations, and numerical methods are presented, along with an introduction to second-order differential equations.
SM
|
| |
-
MTH 250 - Introduction to Linear Algebra
Class Hours: 4, Units: 3
Prerequisite(s): MTH 211 with a C- or higher
Theory and applications of linearity, including vectors, matrices, systems of linear equations, dot and cross products, determinants, linear transformations in Euclidean space, linear independence, bases, eigenvalues, eigenvectors, and diagonalization.
Formerly MTH 310. SM
|
| |
-
MTH 385 - Study Abroad Elective
SM
|
| |
-
MTH 390 - Independent Study
SM
|
| |
-
MTH 395 - Special Topics
SM
|
Mechanical Engineering |
| |
-
ME 185 - Study Abroad Elective
ME
|
| |
-
ME 195 - Special Topics
ME
|
| |
-
ME 220 - Computer Aided Engineering
Class Hours: 2, Units: 2
STCW Requirement Fullfilled: ♦
Prerequisite(s): None
Familiarizes students with virtual product development and fundamentals of parametric design and solid modeling using advanced engineering software tools. Complex component design, assembly design and the development of working drawings are also covered. Students participate in Team Design/Reverse Engineering Projects.
ME
|
| |
-
ME 230 - Engineering Materials
Class Hours: 3, Units: 3
Prerequisite(s): CHE 110
Examination of the properties of materials from the atomic level through the molecular levels, looking at crystal structure. Emphasis is on metals, but nonmetals are discussed. Mechanical properties, creep, fatigue, corrosion, and failure characteristics are discussed. Phase Diagrams and thermal processing are also studied. Applying material properties in design is also discussed.
ME
|
| |
-
ME 232 - Engineering Statics
Class Hours: 3, Units: 3
Prerequisite(s): PHY 200
Analysis of particles and rigid bodies at rest, using vector methods. Topics include the concepts of forces, moments, and equivalent force systems, calculation and use of centroids, equilibrium of rigid bodies, force analysis of trusses, frames, and machines, internal forces in structural members, and friction.
ME
|
| |
-
ME 240 - Engineering Thermodynamics
Class Hours: 3, Units: 3
Prerequisite(s): PHY 200
Study of the basic principles of thermodynamics and their applications to engineering processes and cycles. Topics include study of the first and second laws and the application of these laws to thermodynamic systems, with emphasis on power and refrigeration cycles.
ME
|
| |
-
ME 330 - Engineering Dynamics
Class Hours: 3, Units: 3
Prerequisite(s): ME 232 , MTH 212
Analysis of particles and rigid bodies in motion using vector methods, calculus, and analytical geometry. Topics include kinematic analysis of motion and relative motion, kinetic analysis of forces and motion, rotation and translation of rigid bodies, work-energy methods, and impulse-momentum methods.
ME
|
| |
-
ME 332 - Mechanics of Materials
Class Hours: 3, Units: 3
Prerequisite(s): ME 230 , ME 232 , MTH 211
Application of stress and strain in design and analysis of simple structural members under load. Stresses and deformations in members with a single load in tension, torsion, shear or bending moment are analyzed, followed by the transformation of stresses and effects of combined loads. The analysis of statically indeterminate structures is also included.
ME
|
| |
-
ME 339 - Material/Mechanical Lab
Class Hours: 1, Units: 2
Prerequisite(s): ME 332 , ME 360
Co-requisite(s): ME 339L
Principles of material science, mechanics of materials, and dynamics - applied, reinforced, and assessed through a series of experiments. The experiments involve calibration of instruments, measurement of mechanical quantities using data acquisition systems, analysis of data in order to obtain desired results, estimates of uncertainties in the results, and comparison of results with predicted outcomes based on theory. Experimental theory, procedures, and results are presented in formal written reports as well as oral presentations.
ME
|
| |
-
ME 339L - Material/Mechanical Lab Lab
Lab Hours: 2
Co-requisite(s): ME 339
ME
|
| |
-
ME 340 - Engineering Fluid Mechanics
Class Hours: 3, Units: 3
Prerequisite(s): MTH 212 , ME 232
Theory and fundamental principles of incompressible fluid flows. Topics include hydrostatic fluids, continuity, linear momentum, Bernoulli equations for control volumes, dimensional analysis, viscous duct flows, boundary layer flows, centrifugal and axial flow pumps, and pump performance curves and similarity rules.
ME
|
| |
-
ME 342 - Refrigeration and Air Conditioning
Class Hours: 3, Units: 3
Prerequisite(s): ME 240
Application of principles of thermodynamics and fluid mechanics to selection and performance evaluation of air conditioning and refrigeration systems. Topics include vapor-compression cycle performance, load calculations, refrigeration system component characteristics, refrigerant characteristics, environmental responsibilities, psychometrics and basic conditioning processes, and system balancing of refrigeration systems. Absorption refrigeration systems and cooling tower performance are also studied.
ME
|
| |
-
ME 344 - Heat Transfer
Class Hours: 3, Units: 3
Prerequisite(s): ME 240 , ME 340 , MTH 215
Study of the fundamental mechanisms of the transfer of energy in the form of heat, including conduction, convection, and radiation. Topics include steady and transient conduction, free and forced convection, radiation, and heat exchanger analysis and design.
ME
|
| |
-
ME 349 - Fluid/Thermal Lab
Class Hours: 1, Units: 2
Prerequisite(s): ME 344 , ME 360
Co-requisite(s): ME 349L
Principles and applications of fluid mechanics, thermodynamics and heat transfer through a series of laboratory experiments. Experiments to demonstrate fluid flow measurements, the first and second laws of thermodynamics, conduction and convection heat transfer, heat exchanger analyses and performance, and gas turbine and gasoline engine cycles. Acquisition and statistical analyses of experimental data, and professional laboratory reports are also included.
ME
|
| |
-
ME 349L - Fluid/Thermal Lab Lab
Lab Hours: 2
Co-requisite(s): ME 349
ME
|
| |
-
ME 350 - Electromechanical Machinery
Class Hours: 3, Units: 3
Prerequisite(s): ENG 250 , ENG 250L
Co-requisite(s): ME 350L
This course covers the fundamentals of magnetism, magnetic circuits, and transformers. Included are principles and operation of series, shunt, compound DC generators and motors; single-phase and three-phase AC generators, synchronous and induction AC motors, DC and AC motor controllers, and stepper motors; and system protective devices and safety.
ME
|
| |
-
ME 350L - Electromechanical Machinery Lab
Lab Hours: 2, Units: 1
Prerequisite(s): ENG 250 , ENG 250L
Co-requisite(s): ME 350
Supports instruction and theory of ME 350 using handson motor operation and analysis.
ME
|
| |
-
ME 360 - Instrumentation and Measurement Systems
Class Hours: 2, Units: 2
Prerequisite(s): ENG 210 , ENG 250 , ENG 250L
Co-requisite(s): ME 360L
Measurement techniques for mechanical testing: types of signals, dynamic response of measurement systems, frequency response, uncertainty analysis, types of instruments, basic input circuits, signal conditioning, computer based data acquisition, sampling, A/D conversion, time and frequency analysis, statistical analysis of data.
ME
|
| |
-
ME 360L - Instrumentation and Measurement Systems Lab
Lab Hours: 2, Units: 1
Prerequisite(s): ENG 210 , ENG 250 , ENG 250L
Co-requisite(s): ME 360
Data acquisition using a PC and LabView. Construction and use of basic input circuits. Use of signal conditioning to improve the quality of measurements. Calibration and use of common instruments, including strain gages, thermocouples, photovoltaic cells, RTDs, and accelerometers. Examination of the dynamic response of instruments. Time domain and frequency domain analysis of data. Presentation of data. Uncertainty estimates of measured data. Output of control signals. A final project is required.
ME
|
| |
-
ME 385 - Study Abroad Elective
ME
|
| |
-
ME 390 - Independent Study
ME
|
| |
-
ME 392 - Mechanical Design
Class Hours: 3, Units: 3
Prerequisite(s): ME 332
Two parts are covered in this course. Part one represents the general overview of fundamentals on applied loads, material properties, stress and stains, stress concentrations, static as well as dynamic failure theories, and some tribiological considerations. Part two will relate these fundamentals to various machine elements, such as columns, thin and thick-walled cylinders, shafting and associated parts, bearings, gears fasteners and power screws, springs, brakes and clutches, and flexible machine elements. A design project from the text will be assigned to each group.
ME
|
| |
-
ME 394 - Fluid/Thermal Design
Class Hours: 3, Units: 3
Prerequisite(s): ME 344
This course covers analysis and design aspects of fluid and thermal systems. Included are instruction in piping systems, with the economics of pipe size selection and the sizing of pumps for systems, as well as double pipe, shell and tube, and cross flow heat exchangers: configuration, selection, analysis, and design.
ME
|
| |
-
ME 395 - Special Topics
ME
|
| |
-
ME 429 - Manufacturing Processes Lab
Class Hours: 1, Lab Hours: 2 Units: 2
Prerequisite(s): EPO 215 , ME 220
Co-requisite(s): ME 494
Principles of manufacturing processes in the areas of metal removal, forming, joining, casting, and fundamentals of numerical control. Study of manufacturing includes design aspects, material considerations, review of latest methods, and numerical controlled machining utilizing computer graphics and solid modeling. (Pro/Engineer and Pro/Manufacturing.)
ME
|
| |
-
ME 430 - Mechanical Vibrations
Class Hours: 3, Units: 3
Prerequisite(s): MTH 215 , ME 330
Analysis of mechanical systems undergoing vibration. Topics include free response of vibrating systems, response to harmonic excitation, response to general excitation, analysis of multi-degree of freedom systems using matrix methods, and techniques to suppress vibration. In addition, a series of laboratory experiments are done to demonstrate the theory learned in class.
ME
|
| |
-
ME 432 - Machinery Design
Class Hours: 3, Units: 3
Prerequisite(s): ME 330 , ME 332
This course will cover kinematics and dynamics of machinery and the synthesis of mechanisms to perform desired motions and tasks of mechanisms using linkages, gears, cams, and actuators. Analysis of mechanisms will be studied to determine their rigid-body dynamic behavior. Position, velocity, and acceleration of mechanisms and force analysis of mechanisms will be covered. ProE Mechanism, which is a virtual prototyping tool for mechanism analysis and design, will be demonstrated. Students will use ProE/Creo to design, animate, analyze, and optimize complex threedimensional mechanisms.
ME
|
| |
-
ME 436 - Mechatronic System Design
Class Hours: 3, Units: 3
Prerequisite(s): ENG 250 , ME 330
Introduction to a multidisciplinary field that combines electronics, control systems, mechanical design and simulation. Simulation and design of mechatronic systems with sensors, electronic controllers and mechanical actuators. Selection and mathematical modeling of system elements including common sensors, actuators and various electronic controllers.
ME
|
| |
-
ME 440 - Advanced Fluid Mechanics and Thermodynamics
Class Hours: 3, Units: 3
Prerequisite(s): ME 240 , ME 340
Advanced topics in gas dynamics, including compressible flow analysis of converging-diverging nozzles, normal and oblique shock waves, compressible duct flow with friction; and advanced topics in thermodynamics, including irreversibility, availability, and second-law analysis of thermodynamic systems, gas and vapor mixtures, chemical reactions, and thermodynamics of propulsion systems with applications.
ME
|
| |
-
ME 442 - Heating, Ventilation, and Air Conditioning Design
Class Hours: 3, Units: 3
Prerequisite(s): ME 240 , ME 340
Analysis and design of air conditioning systems for industrial and commercial applications. Topics include psychometrics, heating and cooling loads, HVAC systems and controls, infiltration, ventilation, fan performance, and duct design.
ME
|
| |
-
ME 444 - Energy Systems Design
Class Hours: 3, Units: 3
Prerequisite(s): ME 344
Applications of fundamentals of thermodynamics, fluid mechanics, heat transfer in design, analysis, and selection of power production systems including steam power plants, gas turbines, and auxiliary power units; and heat exchange systems. Topics also include economic evaluation and preliminary cost of estimation of energy systems. A term paper that requires oral presentation and written report on a topic related to energy is also required.
ME
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
|
|
Print this Page